Equipment List

PCB ASSEMBLY

SMT PLACEMENT & REFLOW

• 3 High Speed SMT Lines
• 2 Prototype SMT Lines
• (2) MyData My15 Pick & Place Machine (8 heads): 21,000 CPH capacity
• (1) MyData My12 Pick & Place Machine (8 heads): 21,000 CPH capacity
• (2) MyData TP2-9U Pick & Place Machines 4,200 CPH capacity per machine
• Dek Horizon 03i Fully automatic screen printer with 2D paste verification, Gridlock tooling and Proflow paste dispensing
• MPM SPM w/vision & bottom Stencil wipe Stencil Printer
• (2) Heller 1809 EXL Reflow Ovens (9 zones)
• Heller 1500 Reflow Oven

INSPECTION

• Yes-Tech AOI system
• Phoenix 3-D X-Ray Machine
• Mantis Inspection Stations
• YSC BGA Fiber Optic Vision/Camera System
• Olympus Stereo-zoom Microscopes, Model SZ40
• Sonoa Video Inspection/Documentation System

REWORK STATIONS

• Air-Vac DRS24B BGA Rework Station
• Pace Rework Station, SMD & BGA

WASH STATIONS

• Trek Triton IV Board Washer
• Electrovert Ultracleaner Model UC2
• Ionic Contamination Tester - Aqueous Technologies Corp.
• Separation Tech. MD. ST2005B D.I. Water Treatment System
• CMS-150 Condensate Management System, oil/water separator

PREP EQUIPMENT

• Terren Radial Lead Cutter
• Manix ADP 100 Dip Former & CF200 Radial Lead Former
• OLAMEF Radial Lead Cutter
• Hepco Radial Lead Former
• Manix cf21450 Preparation Machine
• Eubanks 4900-01 Automated Wire Stripper

OTHER

• ATI Assembled Board Router
• Eletrovert Econopak1 SMT Wavesoldering System
• Heat Gun - Weller Model# 6970, Master-Mite
• Selective Solder Pot - SRM4 Air-Vac
• Solder-Pot - Plato Model SP-500T
• Manual & Semi-automatic Arbor Air Press
• Corelis Boundary-Scan Programming & Testing Software
  

Back to top

PCB FABRICATION

COMPUTER-AIDED MANUFACTURING (CAM)

• Valor Genesis CAM Software plus automation programming
• Aegis CircuitCAM Software for Pick & Place Programming & Doc Creation
• Aegis Checkpoint CAM Software for BOM cleanup
• CAM350 CAM
• Polar Impedance calculator, Model Si6000b

PHOTO DEPARTMENT

• (1) CA Picard Artwork Punch, Tooling System
• (1) Temperature/Humidity controlled clean environment
• (1) Mimir Photo-printer 25x25 #9124
• (2) Dupont 5 KW Photo-printer (PC-130)
• (1) Olec 8 KW Photo-printer
• (1) Quantum Diazo Film Developer 24D
• (2) Dupont Dry Film Laminators, HRL-24 with Teknek PC-600DT clean machines
• (1) Gerber/Barco Crescent/30 Laser Photo-plotter
• (1) Gerber/Barco Escort/30 Automatic Film Loader

WET PROCESS

• (1) Chemcut XLI-30 DES Line with thin core (1 mil) transport
• (1) Chemcut XLI-30 Chemical Clean Line
• (1) Chemcut Oxide Line with thin core transport
• (1) Western Tech 300-314/24" conveyerized Pre-Hyoki chemical clean machine
• (1) Ishii-Hyoki Aluminum Oxide Jet Scrubber Model IJS-630
• (1) Western Tech. Heated Board Dryer with D.I. Final Rinse
• (1) Western Tech Model 21 Dry film Developer With Automatic feed/bleed Replenisher Unit
• (1) Western Tech Model 21 LPI Developer With Automatic feed/bleed Replenisher Unit
• (1) Western Tech. Cupric Chloride Etcher Model 21C
• (1) Tektroller Model CC-305 Cupric Chloride Regeneration System
• (1) Western Tech. Dry Film resist Strip/Rinse Tank System
• (1) Western Tech. 9 Tank Cobra bond oxide alternative line.
• (1) Soldermask Strip Line
• (1) Lantronic TT-30 Vertical Hot-Air Leveler
• (1) Compressor, Rotary Screw 25 H.P. Kaeser Model AS-31
• (1) Kaeser TC-31 Refrigerated Air Dryer
• (1) 240 Gallon Vertical Receiver Tank
• (1) CMS-150 Condensate Management System, oil/water separator
• (2) 24" Comac Board Dryers
• (1) Harrington Plastics Ventilation System
• (1) Elite Gold tip Tape Roller
• (1) Marsecco post-clean machine

INSPECTION

• (2) Camtek Orion AOI Systems
• (2) Bausch & Lomb Stereo-zoom Microscope, Model SVB-73
• (4) Olympus Stereo-zoom Microscope, Model SZ40
• (1) Hughes Circuit Welder, Model MCW/El
• (3) 1" Micrometers
• (4) 6" Micrometers
• (4) 10x Inspection Loops
• (10) Magnifying Inspection Lamps
• (4) 60x Microscopes
• (1) Leica Inverted Metallograph with CCTV, video printer, and digital video measurement.
• (1) 8" Grinder/Polisher, 8" aluminum platen, pressure chamber, vacuum dessicator chamber, dessicator plate.

LAMINATION

• (1) Set of C.A. Picard Pin Lamination Tooling plates
• (1) C.A Picard Semi-Automatic Post-Etch Punch
• (1) Wabash Lamination Press, 18 X 24", Model PC75-2418-6TM
• (1) Wabash Cool Down Press, Model K2418-3AC
• (1) Becker U2.70 Vacuum Lamination System
• (1) Lamination Tooling Pin Punch

DRILLING

• (1) Advanced Control 2 Spindle Drill Machines, Model 1240
• (2) Advanced Control 5 Spindle Drill Machines, Model 2500
• (1) Glenbrook Technologies RTX-113 Real Time X-Ray System
• (1) Vacuum System, Carbet 15 H.P.
• (1) Compressor, Rotary Screw 30 H.P. Kaeser MD. AS35
• (1) 240 Gallon Vertical Air Receiver Tank
• (1) CMS-150 Condensate Management System, oil/water separator
• (1) Air Dryer, Kaeser Model KRD-125
• (2) Hankison Compressed Air Dryers
• (2) Ring Setters

SCREENING

• (1) DP10 Screening System & Tunnel Oven
• (4) Elite Screen Tables With Backlighting
• (1) Screen Cleaning Wash Out Booth
• (1) 3 X 3 X 3 Ovens, Grieve Md. 333
• (1) Squeegee Sharpening Machine
• (2) C-Sun Model SMO-7A LPI Tac & Final cure ovens

FABRICATION

• (2) ATI Model 400 4 Spindle NC-Router
• (1) PDA-50 2 Spindle NC-Router And Camstar Controller
• (1) Vacuum System, Carbet 15 H.P.
• (1) Radoll Score Machine
• (1) Radoll Bevelmate edge polisher
• (1) Radoll Bevelmaster gold tip beveler
• (1) Pexto Hydraulic Power Shear Model Ph52
• (1) Wysong H-52 Hydraulic Power Shear
• (1) Bench Grinder

ELECTRICAL TEST

• (1) Microcraft ELX 6146 flying probe tester
• (1) GCA Test fixture, Flying Probe, & Test Verification Software
• (1) CircuitLine 2S Double-Sided Double-density Grid tester (.070/.080 grid)
• (1) Polar Instruments Toneohm short locator, Model 850A
• (1) Polar Instruments Controlled Impedance Tester, Model CITS500s
• (1) Tektronix 1502 TDR Cable Tester
• (1) PerfecTest Inner layer registration test system

SHIPPING

• (1) Christopher Assoc. Vacuum packaging equipment
• (1) Pelouze 100 lbs. Shipping scale

WASTEWATER TREATMENT

• (1) 1000 Gal. Cupric Chloride Holding tank
• (1) Western Tech. Continuous Waste Treatment System with Ph & ORP controller
• (1) Pacific Press 3 Cubic foot Filter Press
• (1) Western Tech. Batch Treatment System
• (1) Isco Sequential/Composite Wastewater Sampler, Model 2900
• (1) Varian AA 20A dual beam Atomic Absorption w/spectrophotometer printer

Back to top

PCB DESIGN

COMPUTER-AIDED DESIGN (CAD - PCB LAYOUTS)

• Mentor Graphics CAD Design
• Pads Power PCB CAD Design
• Protel For Windows CAD Design
• AutoCad
• ORCAD Schematic Capture
  

Back to top